Antennas · F1SYH

Carolina Windom

The Carolina Windom is an off-centre-fed dipole variant that intentionally uses part of the feed line as a vertical radiator.

HF OCF Rayonnement vertical ajouté

Operating principle

A transformer matches the OCF dipole. A controlled coaxial section radiates before a choke blocks further common-mode current.

Main characteristics

G

Typical gain

Variable selon bande
Ω

Impedance

Adaptée par transformateur

Polarization

Horizontale et verticale

Difficulty

Avancée

Dimensions and design

The two legs use an asymmetric ratio. The vertical coax length and choke position are part of the design.

Construction and tuning

Step 1

Select a documented version for the required bands.

Step 2

Cut both legs to the specified ratio.

Step 3

Install the specified transformer.

Step 4

Measure the vertical coax section.

Step 5

Install the choke at the designed distance.

Step 6

Keep the radiating section away from metal.

Advantages

  • Several bands.
  • Useful vertical component.
  • Convenient off-centre feed.
  • No traps.

Limitations

  • Intentional coax radiation.
  • Installation-dependent behaviour.
  • Critical choke.
  • Historically imprecise Windom name.

History and origin

The Carolina Windom was developed as a modern OCF variant adding a vertical radiation component.

Safety

The coaxial section before the choke radiates and must remain away from people and equipment.

← Back to the encyclopedia